Logscape Support

BrainWaveCC · BrainWaveCC

I currently have Logscape v2.5.2 running on Windows 2012-R2, and I have Syslog configured for TCP 514 and UDP 514 I am able to get some of the logs that I send to the system, but my Syslog server is recognizing the clients by their IPv6 addresses, and so they are not able to create the filename based upon th...

ayratn · ayratn

Hi, I have:Windows 7 Pro SP1, 64 bit Trying to install either Logscape-2.5.2_b0310-x64-setup.msi or Logscape-2.5.2_b0310-setup.msi. Getting the same error in Installer: Java Runtime Environment is not installed or incompatible. Note: Please Install Oracle JRE 1.6 or later. Note 2: Use the 6...

Skazal · Skazal

I tried to do a new install using the 2.5.0_b123-x64 MSI package (manager and agent on the same server), but the manager never seems to start (the browser never connects to port 8080). I seem to recall going through this before, but can't find my notes. I've subsequently uninstalled and tried reins...

Istair · Istair

A useful bit of code if you're automating deployments. Use Case: A forwarder with multiple network cards. If you want to force Logscape to use a certain LAN for example, you have to set the -Dnet.iface parameter with the ETH device number - which on Windows Hosts is found using the NetworkList.bat scr...

Skazal · Skazal

When I view the results of a DataSource, I'm getting "java.lang.IllegalArgumentException" as a column heading. Where do I look to find out what is causing this?

parman · parman

I want to test out logscape to monitor Web servers using nginx/haproxy and tomcat. I have downloaded and deployed the applications and setup the servers are forwarders, but I'm not able to show any data. I was looking at the documentation and it says the following but I'm not sure where the overrid...

Istair · Istair

Hot on the heels of the FileScannerApp, comes the HouseKepperApp-1.0 Since Logscape is running on most of your hosts, why not use it to clean up directories as and when they need it. The two main use cases so far: 1. Cleanining .hprof dump files from Java application folders 2. Removing common data f...

Istair · Istair

I want to know if the data has arrived... An odd question? Perhaps not. When you work with multiple systems, I'm sure you've all hit the same issues as I have. Sometimes, the output from System X never made it to downstream System Y. Now, if you're using a nice messaging system then there may well be some...

Skazal · Skazal

I've seen instructions for restarting the Logscape server on unix platforms (e.g., ./logscape.sh stop), but what are the proper steps for restarting on Windows?

Istair · Istair

We were having some issues with TCP connections - we needed to know exactly which ports were in use and by which applications. I came across a useful script by Cookie Monster on TechNet and made it into an app. https://github.com/istairbn/NetStatsApp-1.0 It's on GitHub for grabbing - any feedback...

Istair · Istair

I'm putting together some FAQs for my users on Apps. Anyone have any other advantages for keeping .config files in Apps But I can create Workspaces/searches/alerts in the GUI. Why should I bother putting them in an App?Yes, you can create the Workspaces and searches on the fly - often you will do so. Ho...

sokrazel · sokrazel

Hi, I just started to use logscape, and I have added my first agent to the master server. But, I see as an AgentID there is a very unfriendly name , how can that be configured and changed?

sokrazel · sokrazel

So, all passwords in clear text?

Istair · Istair

other.http://logscape.github.io/deploy-administration-appsproperties.htmlhttp://logscape.github.io/technology-apps-bundle.html

Istair · Istair

Synthetic fields are great - really powerful! Allowing you to transform data in useful ways with a little groovy. I find that the two problems I run into are: 1. With all the things I could do, what should I do to get the best data? 2. I know I did some brilliant groovy last week... I just have to check all my...

cy83Rsh4rk · cy83Rsh4rk

Forgive me if this is something easy but I'm new to logscape. My understanding is that both the manager and the forwarder should run on port 11000. Howerver, my forwarder seems to be running on port 11003 and it can't connect to the manager so it dies. Here's a snippet of my agent.log... 2015-03-07 19:...

neilson9 · neilson9

All, Through our library dependencies we are seeing the most important libs of 2014 have stopped supporting java6; this includes Lucene, ElasticSearch and Jersey. Do you still need Java6 because we are forced to stop supporting it as we move to newer libraries. If you need it please tell us in the thr...

ZG · ZG

We are planning to add new analytic functions to Logscape. Please add any analytic functions that you would like to see included with along with a potential use case. funcs: sumDelta, avgDelta, valueDelta,minDelta,maxDelta use case: Delta Functions many metrics are reported by applicati...

neilson9 · neilson9

Logscape 2.6 will be due out before the end of april. It will contain: 1. The use of d3pie to improve pie chart functionality/printing http://d3pie.org/ 2. Corruption fix where by reindexing may trigger persistit corruption 3. Fix for table linking (workflow) functionality.

Ray · Ray

Hi all, I am new to Logscape and so far it seems like a very good product. I have so far installed the Management and also a forwarder, but I am having issues deploying the Docker App. When I deploy it, there doesn't seem to be anywhere that shows the Docker Resources on a workspace or that a Workspace ex...

dan-c-it · dan-c-it

I am using the following search to produce the following chart(table) * | _tag.include(syslog) IPAddr.include(192.168.0.102) urldomain.count(urldomain,) chart(table) buckets(1) Is there any syntax that I can add to this search string to cause the chart(table) output to be sorted by the...

dan-c-it · dan-c-it

I am just trying to report a broken link for the "Learn More" hyperlink at http://logscape.github.io/types.html It would be great if this link could be fixed so that I (and everyone else) could review the detailed documentation for synthetic fields. See Screenshot below. Please le...

Skazal · Skazal

I want to grab a portion of a line with something like this somewhere in the string: 121ms 11232 455433 BATCH(11) SELECT table_name from sys_tables In the line there can be nearly any number of space separated strings between the 'ms' and "SELECT" and "SELECT" can be any SQL k...

Denno · Denno

Hi, I'm trying to count the number of events in a limited time period. Eventually I want to get the max, min and average "hits" per minute. Logscape is not really doing what I want, so let's assume I do something wrong I have this search: IN-REQ | _date+_hour+_minute.count(,) chart(t...

Skazal · Skazal

Will there be an update to the PostgreSQL App to support Windows Platforms? It's a priority for me. -Thom

csolit · csolit

I've setup logscape on a windows 2012 r2 server and successfully have it logging events from 4 remote syslog clients (3 windows 2012 servers and 1 cisco asa appliance). When I initially pointed those servers to the logscape server, the host directory name was created under the ./work tree just as ex...

dajinn · dajinn

Hi, I'm trying to download the most latest versions of logscape but I'm not getting the download instructions email and I've tried two different addresses and checked my spam folders. Would it be possible to host a direct link? Thank you!

schap · schap

Lol I can not get this thing to work and show up in the browser. This is not my first rodeo doing this so please someone help me figure out whats wrong. Thanks! STOPPING LogScape Stopping 17172 Stopped, Waiting for 60 seconds before starting Starting... STARTING Logscape boot: ./boot.sh: line 5: warn...

Skazal · Skazal

I'm running the latest version of Logscape on a Windows platform (just a manager with a forwarder on another Windows app server) and I wanted to use part of the JavaApp's capability to get metrics via the com.sun.management.jmxremote capability. I configured my Java applications on the remote ho...

aluisios · aluisios

Greetings, After a server reload the logscape not come online anymore. When I try to restart the process i receive the follow message: 2014-12-10T23:09:07.483-02:00 Wait 30 seconds for the DASHBOARD on PORT:8080 2014-12-10T23:09:07.483-02:00 VSOMain lookup:stcp://localhost:11000 PORT:...

Topic		Started By	Replies	Views	Last Post
	Problems with Syslog and IPv6 (Preview) I currently have Logscape v2.5.2 running on Windows 2012-R2, and I have Syslog configured for TCP 514 and UDP 514 I am able to get some of the logs that I send to the system, but my Syslog server is recognizing the clients by their IPv6 addresses, and so they are not able to create the filename based upon th...	BrainWaveCC	1	970	Aug 6, 2015 by neilson9
	Installer show error on JRE and MSI (Preview) Hi, I have:Windows 7 Pro SP1, 64 bit Trying to install either Logscape-2.5.2_b0310-x64-setup.msi or Logscape-2.5.2_b0310-setup.msi. Getting the same error in Installer: Java Runtime Environment is not installed or incompatible. Note: Please Install Oracle JRE 1.6 or later. Note 2: Use the 6...	ayratn	1	561	Jul 20, 2015 by Nathen
	New Windows Install Issue (Preview) I tried to do a new install using the 2.5.0_b123-x64 MSI package (manager and agent on the same server), but the manager never seems to start (the browser never connects to port 8080). I seem to recall going through this before, but can't find my notes. I've subsequently uninstalled and tried reins...	Skazal	9	793	Jun 11, 2015 by Skazal
	Automatically configure the Logscape _Dnet-iface parameter (Preview) A useful bit of code if you're automating deployments. Use Case: A forwarder with multiple network cards. If you want to force Logscape to use a certain LAN for example, you have to set the -Dnet.iface parameter with the ETH device number - which on Windows Hosts is found using the NetworkList.bat scr...	Istair	0	593	Jun 8, 2015 by Istair
	Exception in column header (Preview) When I view the results of a DataSource, I'm getting "java.lang.IllegalArgumentException" as a column heading. Where do I look to find out what is causing this?	Skazal	1	510	Jun 3, 2015 by Istair
	New to Logscape - Questions (Preview) I want to test out logscape to monitor Web servers using nginx/haproxy and tomcat. I have downloaded and deployed the applications and setup the servers are forwarders, but I'm not able to show any data. I was looking at the documentation and it says the following but I'm not sure where the overrid...	parman	7	1078	Jun 1, 2015 by Istair
	HouseKepperApp-1.0 - Keep those pesky files in order! Apps environment maintenance (Preview) Hot on the heels of the FileScannerApp, comes the HouseKepperApp-1.0 Since Logscape is running on most of your hosts, why not use it to clean up directories as and when they need it. The two main use cases so far: 1. Cleanining .hprof dump files from Java application folders 2. Removing common data f...	Istair	0	1277	May 29, 2015 by Istair
	FileScannerApp-1.0 - Monitor the output with Integrated systems logscape App Systems Integration (Preview) I want to know if the data has arrived... An odd question? Perhaps not. When you work with multiple systems, I'm sure you've all hit the same issues as I have. Sometimes, the output from System X never made it to downstream System Y. Now, if you're using a nice messaging system then there may well be some...	Istair	0	867	May 26, 2015 by Istair
	Restarting Logscape Server on windows (Preview) I've seen instructions for restarting the Logscape server on unix platforms (e.g., ./logscape.sh stop), but what are the proper steps for restarting on Windows?	Skazal	1	631	May 22, 2015 by Istair
	NetStatsApp-1.0 App Networking TCP (Preview) We were having some issues with TCP connections - we needed to know exactly which ports were in use and by which applications. I came across a useful script by Cookie Monster on TechNet and made it into an app. https://github.com/istairbn/NetStatsApp-1.0 It's on GitHub for grabbing - any feedback...	Istair	2	924	May 13, 2015 by Istair
	Use Cases for App .config files best-practice apps config (Preview) I'm putting together some FAQs for my users on Apps. Anyone have any other advantages for keeping .config files in Apps But I can create Workspaces/searches/alerts in the GUI. Why should I bother putting them in an App?Yes, you can create the Workspaces and searches on the fly - often you will do so. Ho...	Istair	2	1281	May 6, 2015 by Istair
	AgentID (Preview) Hi, I just started to use logscape, and I have added my first agent to the master server. But, I see as an AgentID there is a very unfriendly name , how can that be configured and changed?	sokrazel	1	567	Apr 20, 2015 by Istair
	forum not https? (Preview) So, all passwords in clear text?	sokrazel	0	986	Apr 18, 2015 by sokrazel
	Override.Properties Question (Preview) other.http://logscape.github.io/deploy-administration-appsproperties.htmlhttp://logscape.github.io/technology-apps-bundle.html	Istair	1	663	Apr 13, 2015 by Nathen
	Useful Groovy for Synthetic Fields logscape synthetic-fields tips (Preview) Synthetic fields are great - really powerful! Allowing you to transform data in useful ways with a little groovy. I find that the two problems I run into are: 1. With all the things I could do, what should I do to get the best data? 2. I know I did some brilliant groovy last week... I just have to check all my...	Istair	2	1429	Mar 31, 2015 by Istair
	Forwarder seems to be running on the wrong port (Preview) Forgive me if this is something easy but I'm new to logscape. My understanding is that both the manager and the forwarder should run on port 11000. Howerver, my forwarder seems to be running on port 11003 and it can't connect to the manager so it dies. Here's a snippet of my agent.log... 2015-03-07 19:...	cy83Rsh4rk	7	1434	Mar 30, 2015 by cy83Rsh4rk
	Java 6 support is being deprecated, do you care? (Preview) All, Through our library dependencies we are seeing the most important libs of 2014 have stopped supporting java6; this includes Lucene, ElasticSearch and Jersey. Do you still need Java6 because we are forced to stop supporting it as we move to newer libraries. If you need it please tell us in the thr...	neilson9	1	633	Mar 30, 2015 by Istair
	Poll for New Analytic Functions (Preview) We are planning to add new analytic functions to Logscape. Please add any analytic functions that you would like to see included with along with a potential use case. funcs: sumDelta, avgDelta, valueDelta,minDelta,maxDelta use case: Delta Functions many metrics are reported by applicati...	ZG	4	688	Mar 30, 2015 by Istair
	Logscape 2.6 release note (Preview) Logscape 2.6 will be due out before the end of april. It will contain: 1. The use of d3pie to improve pie chart functionality/printing http://d3pie.org/ 2. Corruption fix where by reindexing may trigger persistit corruption 3. Fix for table linking (workflow) functionality.	neilson9	0	660	Mar 25, 2015 by neilson9
	DockerApp-1.0 (Preview) Hi all, I am new to Logscape and so far it seems like a very good product. I have so far installed the Management and also a forwarder, but I am having issues deploying the Docker App. When I deploy it, there doesn't seem to be anywhere that shows the Docker Resources on a workspace or that a Workspace ex...	Ray	10	850	Mar 12, 2015 by Nathen
	Search Syntax to control the sort order of the rows in a chart(table) to sort by the "Count" column (Preview) I am using the following search to produce the following chart(table) * \| _tag.include(syslog) IPAddr.include(192.168.0.102) urldomain.count(urldomain,) chart(table) buckets(1) Is there any syntax that I can add to this search string to cause the chart(table) output to be sorted by the...	dan-c-it	9	975	Mar 10, 2015 by neilson9
	Broken "Learn More" link in Logscape online documentation at http://logscape.github.io/types.html (Preview) I am just trying to report a broken link for the "Learn More" hyperlink at http://logscape.github.io/types.html It would be great if this link could be fixed so that I (and everyone else) could review the detailed documentation for synthetic fields. See Screenshot below. Please le...	dan-c-it	2	550	Mar 6, 2015 by dan-c-it
	Character sets as delimiters (Preview) I want to grab a portion of a line with something like this somewhere in the string: 121ms 11232 455433 BATCH(11) SELECT table_name from sys_tables In the line there can be nearly any number of space separated strings between the 'ms' and "SELECT" and "SELECT" can be any SQL k...	Skazal	3	602	Mar 5, 2015 by Nathen
	Search: count number of events per minute search label (Preview) Hi, I'm trying to count the number of events in a limited time period. Eventually I want to get the max, min and average "hits" per minute. Logscape is not really doing what I want, so let's assume I do something wrong I have this search: IN-REQ \| _date+_hour+_minute.count(,) chart(t...	Denno	2	638	Feb 18, 2015 by ZG
	PostgreSQL App on Windows (Preview) Will there be an update to the PostgreSQL App to support Windows Platforms? It's a priority for me. -Thom	Skazal	3	534	Feb 12, 2015 by Skazal
	Remote syslog data not coming over to logscape server (Preview) I've setup logscape on a windows 2012 r2 server and successfully have it logging events from 4 remote syslog clients (3 windows 2012 servers and 1 cisco asa appliance). When I initially pointed those servers to the logscape server, the host directory name was created under the ./work tree just as ex...	csolit	1	956	Jan 14, 2015 by ZG
	Latest version download link? (Preview) Hi, I'm trying to download the most latest versions of logscape but I'm not getting the download instructions email and I've tried two different addresses and checked my spam folders. Would it be possible to host a direct link? Thank you!	dajinn	1	583	Jan 10, 2015 by neilson9
	SOMEONE HELP (Preview) Lol I can not get this thing to work and show up in the browser. This is not my first rodeo doing this so please someone help me figure out whats wrong. Thanks! STOPPING LogScape Stopping 17172 Stopped, Waiting for 60 seconds before starting Starting... STARTING Logscape boot: ./boot.sh: line 5: warn...	schap	5	958	Dec 16, 2014 by ZG
	JMX Remote Data (Preview) I'm running the latest version of Logscape on a Windows platform (just a manager with a forwarder on another Windows app server) and I wanted to use part of the JavaApp's capability to get metrics via the com.sun.management.jmxremote capability. I configured my Java applications on the remote ho...	Skazal	0	659	Dec 15, 2014 by Skazal
	logscape not come online after server reload (Preview) Greetings, After a server reload the logscape not come online anymore. When I try to restart the process i receive the follow message: 2014-12-10T23:09:07.483-02:00 Wait 30 seconds for the DASHBOARD on PORT:8080 2014-12-10T23:09:07.483-02:00 VSOMain lookup:stcp://localhost:11000 PORT:...	aluisios	1	665	Dec 15, 2014 by neilson9
«First < 1 2 \| Page of 2 sorted by